What is the first thing you need to do when buying a brand new robot mower?
-Upgrade firmware of course!
It actually runs smother around the edges with the new update!
Firmware download has changed. I do not know at this moment how to obtain the firmware as I have sold my house with the lawnmower. It might be that you need to register the robot on your landroid account.
It was easy to download the firmware at https://www.worxlandroid.com/nb-NO/software-update/check all you need is the serial. You can find that under the lid on a small removable sticker. I recommend that you remove the sticker and put it in your garage or so.
One you have downloaded the firmware put it on a FAT 32 USB stick and go out to your robot mower.
Flip it around and unscrew the 4 screws protecting the battery and find the usb here:
Now simply insert your usb stick and flip your robot back over
Turn it on and firmwareupdate will start automatically.
It will tell you in some seconds to remove the USB. Just flip the robot back over and remove the USB key and screw the plastic case back over the battery with the 4 screws.
Now just wait a second and you are done.
And I highly recommend doing this as the droid works way better around the edges than before.
The unit was super cheap at Coop Obs bygg. Only 5990kr all cables and pegs included.
August 1, 2018 at 7:42 am
I enjoyed your article on upgrading the firmware of the Android. Unfortunately, the link pointing to the firmware doesn’t seem to work anymore. Do you have any idea where the guys from Work might have put it? I’ve been searching for a long time but with no success so far. You might wonder: “what about Work support?”. Tried all channels. They only point to each other.
August 1, 2018 at 8:24 am
Good question, I do not know unfortunately.